Monday, November 2, 2009

What would life be like without lasers? Part C - Using Lasers to Burn and Read CDs and DVDs

CDs and DVDs are everywhere these days. Whether they are used to hold music, data or computer software, they have become the standard medium for distributing large quantities of information in a reliable package. Compact discs are now easy and cheap to produce. If you have a computer and CD-R drive, you can create your own CDs, including any information you want.

The Disc
A CD is a fairly simple piece of plastic, about four one-hundredths (4/100) of an inch (1.2 mm) thick. Most of a CD consists of a piece of clear polycarbonate plastic, shaped like a disc. During manufacture, this plastic is impressed with microscopic bumps arranged as a single, continuous, extremely long spiral track of data. Once the clear piece of polycarbonate is formed, a thin, reflective aluminum layer is sputtered onto the disc, covering the bumps. Then a thin acrylic layer is sprayed over the aluminum to protect it. The label is then printed onto the acrylic. A cross section of a complete CD looks like this:
The Spiral
A CD has a single spiral track of data, circling from the inside of the disc to the outside. What the picture on the right does not even begin to impress upon you is how incredibly small the data track is -- it is approximately 0.5 microns wide, with 1.6 microns separating one track from the next. (A micron is a millionth of a meter.) And the bumps are even more miniscule...


The Bumps
The elongated bumps that make up the track are each 0.5 microns wide, a minimum of 0.83 microns long and 125 nanometers high. (A nanometer is a billionth of a meter.) Looking through the polycarbonate layer at the bumps, they look something like this:
The bumps are arranged in a spiral path, starting at the center of the disc. The CD player spins the disc while the laser assembly moves outward from the center of the CD.

CD Player Components
The CD player has the job of finding and reading the data stored as bumps on the CD. Considering how small the bumps are, the CD player is an exceptionally precise piece of equipment. The drive consists of three fundamental components:
  • A drive motor spins the disc.
  • A laser and a lens system focus in on and read the bumps.
  • A tracking mechanism moves the laser assembly so that the laser's beam can follow the spiral track.

You will often read about "pits" on a CD instead of bumps. They appear as pits on the aluminum side, but on the side the laser reads from, they are bumps.

The incredibly small dimensions of the bumps make the spiral track on a CD extremely long. If you could lift the data track off a CD and stretch it out into a straight line, it would be 0.5 microns wide and almost 3.5 miles (5 km) long! To read something this small you need an incredibly precise disc-reading mechanism. The key element in this mechanism is the pinpoint beam of a laser.

The fundamental job of the CD player is to focus the laser on the track of bumps. The laser beam passes through the polycarbonate layer, reflects off the aluminum layer and hits an opto-electronic device that detects changes in
light. The bumps reflect light differently than the "lands" (the rest of the aluminum layer), and the opto-electronic sensor detects that change in reflectivity. The electronics in the drive interpret the changes in reflectivity in order to read the bits that make up the bytes.

The hardest part is keeping the laser beam centered on the data track. This centering is the job of the tracking system. The tracking system, as it plays the CD, has to continually move the laser outward. As the laser moves outward from the center of the disc, the bumps move past the laser faster. Therefore, as the laser moves outward, the spindle motor must slow the speed of the CD. That way, the bumps travel past the laser at a constant speed, and the data comes off the disc at a constant rate.

CDs store music and other files in digital form -- that is, the information on the disc is represented by a series of 1s and 0s. In conventional CDs, these 1s and 0s are represented by millions of tiny bumps and flat areas on the disc's reflective surface.

To read this information, the CD player passes a
laser beam over the track. When the laser passes over a flat area in the track, the beam is reflected directly to an optical sensor on the laser assembly. The CD player interprets this as a 1. When the beam passes over a bump, the light is bounced away from the optical sensor. The CD player recognizes this as a 0.

The advent of CD burners marked a huge cultural shift. The technology made it feasible for the average person to gather songs and make their own CDs. Today, writable CD drives (CD burners) are standard equipment in new PCs, and more and more audio enthusiasts are adding separate CD burners to their stereo systems.

CD burners darken microscopic areas of CD-R discs to record a digital pattern of reflective and non-reflective areas that can be read by a standard CD player. Since the data must be accurately encoded on such a small scale, the burning system must be extremely precise.

In addition to the standard read laser, a CD burner has a write laser. The write laser is more powerful than the read laser, so it interacts with the disc differently: It alters the surface instead of just bouncing light off it. Read lasers are not intense enough to darken the dye material, so simply playing a CD-R in a CD drive will not destroy any encoded information.

Questions or comments? E-mail us!

References:

Brain, Marshall. "How CDs Work." 01 April 2000. HowStuffWorks.com. <
http://electronics.howstuffworks.com/cd.htm> 02 November 2009.

Harris, Tom. "How CD Burners Work." 01 August 2001. HowStuffWorks.com. <
http://computer.howstuffworks.com/cd-burner.htm> 02 November 2009.